Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The innovative Ghost immobiliser will protect your precious vehicle from key-long theft and relay theft. Your car won't even start in the event that someone doesn't have your PIN code.
Transport Mode allows you to temporarily disable the device, which is great for vehicle transportation and servicing. It is then activated by entering a pin code again.
There are no Key Fobs or Led Indicators
The Ghost 2 immobiliser offers a strong defense against modern car theft methods. Its undetectable installation and engine stop-blocking can reduce the chance of your vehicle being stolen, which could offer peace of mind and could even save you money on insurance premiums.
It cannot be detected by scanners, and it is not hacked using common methods like key cloning or signal jamming. The device uses buttons on your vehicle, such as those found on the steering wheel or door panels, to generate an unique PIN number that can be changed. This sequence could be as long as 20 presses. If the correct sequence is entered, or in the event that the beacon or mobile app is employed, only the vehicle owner is able to start the engine, providing an additional layer of security against thieves.
You can also enable a convenient service mode for situations like valet parking or servicing that require you to temporarily disable the system. The mobile app makes it simple to do this, while ensuring that your vehicle is protected when it is being serviced. Once ghost 2 immobiliser problems is completed it is easy to switch back to secure mode. This will ensure that your vehicle is protected throughout the day.
The Ghost 2 is far more user-friendly than other systems that require a fob. The app can be used as a spare key in emergency situations. This allows you to drive while your security is off, without having to enter a PIN code.
No Radio Frequency Signals
The Ghost 2 immobiliser is not like other security systems which require a separate remote control. It can be controlled using the buttons that are already on your steering wheel or console. The device is undetectable by thieves who employ RF scanning technology or code grabbing, so your car won't start for them should they get your key.
The device uses a unique 'password' sequence of buttons that locks the engine. This personalised PIN code can be entered through the app or via the existing buttons on the steering wheel or on the central console. You can also lock the gearbox so that your car is not able to be driven unless you have your key or pin code. The device can also be set to Transport mode, which lets you drive your car without entering the pin code, and also providing your vehicle with extra protection when it's being used to valet or service parking.
The Ghost 2 immobiliser was designed to be as subtle as possible, making it a great theft deterrent. This makes it a great option for those who spent a lot on customising their cars, or have expensive or rare vehicles. Many people have said that the device is an excellent method to protect their vehicles from being stolen. Some have even reported stories of attempted car thefts that were foiled by it. The Ghost 2 is also very versatile. Customers report that it can be used with their regular keys and with the emergency button on their vehicle, giving them peace of mind when they're away from their car.
No Radio Frequency Scanners
Secure your vehicle from hacking, key cloning, and key theft with the Ghost immobiliser. The system utilises the buttons in your vehicle, like those on the dashboard and your steering wheel to create a unique, changeable sequence of buttons that only you know. Without this sequence, your car will not start. The combination of a unique disarm sequence and the absence of radio frequency signals makes it extremely hard to attack or evade.
Contrary to the Thatcham-approved devices that rely on radio frequency scanning the Ghost CAN Immobiliser operates completely silently and does not require any external signals to perform its magic. It's a safer option and can be insured if installed by an approved installer of TASSA (we are one of them!) ).
It is highly recommended that you hire a professional installer install the Ghost immobiliser. This is due to the manner in which it is integrated into the vehicle. This will ensure that it is fully integrated into your vehicle's systems, resulting in optimal performance and a less risk of malfunction.
Professional installation is often with warranties and support to further enhance the value of your purchase. This is a significant protection against thieves who are less likely to make any attempts at bypassing the device as a result of its security features and skilled installation.
In addition to being an effective deterrent to thieves, the Ghost is designed to be user-friendly as well. It can be programmed to automatically re-arm a certain amount of time after you have parked your car. This means you don't have to remember your PIN code every time. It offers a Service/Valet mode if you want to leave your car for valet parking or for servicing. This can be enabled and deactivated by an easy indicator sequence.
No Wire Cutting
The Ghost 2 does not require cutting any wires from your car in order to install it, ensuring a the non-invasive integration of your vehicle's original systems. It connects to your vehicle's CAN data networks, and is programmed with an unique PIN code. This will prevent anyone else from starting the engine if they don't have a personalised sequence of PINs or app authorization.
The device is also undetectable by the specialist scanning tools that some thieves use, and it is silent as it doesn't transmit radio signals like other immobilisers. It is weatherproof, sealed and small enough to be concealed inside the vehicle.
The Ghost II also has the capability to be switched into 'transport mode' which allows it to be used for short periods of time without the need for an individual PIN. This is a great option for situations like giving the car to a family member or in a situation of emergency. You can start your vehicle quickly and securely.
When installing the Ghost II, it's important to be in a well-lit area and wear safety gear for working with electrical and tool components. A basic set of hand tools can allow you to make precise connections while a multimeter can help determine electrical values and ensure that your wiring is secure. Insulation tape and cable tie can be used to shield any wires that are cut or exposed or to join them during installation.
It is crucial to disconnect the battery of your vehicle prior to beginning any wiring work. This will stop any accidental airbag deployments or electrical shocks from occurring if the battery is accidentally disconnected when the Ghost II is still connected to the vehicle's system.
Easy to Install
The Ghost immobiliser is a unique next-generation device that works by connecting directly to the vehicles CAN Data Network and using a unique PIN Code to prevent your vehicle from getting started. This makes it more difficult to break than traditional alarm systems or after market key fobs and also provides greater protection against key cloning hacking as well as relay attacks.
The unit can be hidden in your vehicle and uses the buttons that are already present on your dashboard and steering wheel to generate the sequence you can recognize. This stops thieves from being able make use of a key that is cloned to start your vehicle. It also prevents them from using an instrument for diagnosing which is focused on hacking the OBD.
Installation is simple and requires no cutting of wires. The unit is connected to the vehicle's CAN bus through an unchanging 12V supply and a grounding connection. Hand tools of a basic nature are sufficient for the installation process and a multimeter will assist with pinpointing the correct wires. Insulation tape or heat shrink tubing is recommended to shield the connections and cable ties can be utilized to keep the wiring tidy and organised.
After installation, the unit is put into a learning mode that will record your individual buttons or sequences in order to create your own unique pin code. This information is stored in the CAN network which makes it nearly impossible for anyone to duplicate your sequence and then start your vehicle.
Transport Mode is a feature that can be used in an emergency if you forget your PIN code, decide to sell your vehicle or a button becomes inoperative. This will turn off the Ghost system completely but will automatically activate when you exceed 31 mph for more than 15 minutes or you enter your PIN Code. This is ideal for people who rent out their vehicles on services such as Turo or ZipCar.